ALL MOLDINGS SOLD.  Thanks Forum

Due to a Starliner restoration being cancelled, I will be selling off a lot of parts that I have for that project.
I have the;
1- right and left tail-fin moldings         --------)    All of these moldings were professionally polished,
                                                                          at  Advanced Plating, Nashville, TN.   BEAUTIFUL WORKMANSHIP 2- right and left lower door moldings           )
3- right and left lower 1/4 panel moldings   )
4- right and left front of fender moldings     )
5- right and left headlite bezels         --------)  
I have several hood moldings, center grille moldings, radiator surge tanks, grilles, etc... that have not been polished yet but are mostly in very nice condition.... some better than others. There is a lot more parts but I will not flood the ad listing more today.
I also have 4 '61 Starliner project cars, a '61 2 dr sedan and a '61 Galaxie 500 (with factory air) projects that are going to be put up for sale and several '62 Galaxie and Galaxie 500's (mostly Z, M and G code car) projects.
Call or email if you have any questions.... please NO texts... I don't do texts!!...8 six 5-two 5 0- nine 9 0 nine
Thanks, Rick...I can ship moldings in PVC tubing if requested. Located in the Knoxville, TN area...zip 37737

Mother Nature has finally caught up with me after 63 years of playing with my Fords..... it is now time to sell off while I can.
I have a:
SOLD-----'60 Starliner parts car
'61 Starliner, 390/auto/pwr/strg, pwr/brkes
Car has sat for over 35 years inside, seats are there, little body work
'61 Starliner, bare body only but I do have frame, rear end, front end and lots of parts to build
'61 Starliner, needs frame off to build it right. Needs lwr 1/4 sections, probably some floor work, etc.  No engine but it does have the 3 speed trans still in it. It is a rolling project
'61 Fairlane, 2 dr. sedan, Y-block, body in good condition
SALE PENDING -----'61 Galaxie, 2 dr. hardtop, no engine/trans, has FACTORY AIR COND except compressor/brackets are missing. A really good car to build.
'62 Galaxie 500, 2 dr. sedan, M code engine, no engine or trans. good car to build
'62 Galaxie 500, 2 dr. sedan, B code, black/red int, no eng/trans
'62 Sunliner FRAME,  it has been steam cleaned, sandblasted then powder coated in semi-gloss black, than ALL front and rear suspension/brakes rebuilt with NOS Moog parts. I stopped right before I installed a Borgenson box on it. It is on rolling tires/wheels..
If you have any serious interest in any of the above or are looking for a healthy FE engine, just holler and I will get you more info and price. I really don't want to sell off just a little molding, etc.. right now......let me know if you need something and I will put it on my list.
Thanks for the Forum space,
Rick
Knoxville, TN. area
rbt3246(at)bellsouth.net
 

I have a friend looking for a factory '62 / '64 4 speed shifter complete if he can find one. It will be used in his '62 Galaxie 406 street car so he would like for it to look close to original. Thanks for any help, Rick.

Not sure where you live but I am in eastern part of TN (Knoxville area), the machine shop that I have used for about 15 years is in Pigeon Forge (home of a lot of hot rod &  car shows, etc) and the average Y-block re-build runs about $2500 to $3000... that is total cost which includes machine shop cost, parts and labor cost for building.. That assumes an engine is sent to be re-built... not for a new build where everything has to be supplied.
I built 22 T-Bird 312 engines in a row several years ago for a local T-Bird club and the average out-the-door price was just a little over $3500 each but most of the engines had new BT 4V manifolds, new Holley carbs & new MSD ignitions.
I know prices vary depending on locale but that seems to be on the high side. Rick

George, received the spindles....... thanks for the promptness. Rick