Galaxie Forum Full-size Ford, Lincoln, and Mercury DazeCars www.galaxieforum.com

This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars

You are not logged in. Would you like to login or register?



  • Index
  •  » Full-size Ford, Lincoln, and Mercury cars
  •  » PCV Hose

    • 1 of 1

       

    June 30, 2013 10:05 am  #1

    rcarpenter15
    New member

    Offline

    From: Tehuacana Texas
    Registered: June 28, 2013
    Posts: 4

    PCV Hose

    Does anyone know where i can purchase the PCV hose for a 1965 Galaxie with the 352 engine?? It seems like i can find it for ever other ford engine but this one. Maybe the hose for a 390 will fit??

     

    July 1, 2013 11:09 am  #2

    Daze
    Administrator

    Offline

    Registered: July 24, 2012
    Posts: 1,043

    Re: PCV Hose

    you should be able to use any piece of rubber hose between the PVC valve and the carb

     

    July 2, 2013 6:04 am  #3

    63gal427
    Member

    Offline

    From: Western Australia
    Registered: February 14, 2013
    Posts: 21

    Re: PCV Hose

    All I used was the right size heater hose on the rear of my intake. It should be flexible enough unless you are wanting a very tight bend.

     

     

    1 of 1

  • Index
  •  » Full-size Ford, Lincoln, and Mercury cars
  •  »  PCV Hose

    • Board footera

     

    Powered by Boardhost. Create a Free Forum