| This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars |
1 of 1
Offline
I know there are conversion kits available, but does anyone know if the disc brake spindles from any later model (early 70s?) Fords will bolt on to my '67 Galaxie? Any help will be greatly appreciated! 
Offline
Yes they will. I fitted a complete '71 disc brake front including spindles to my '63 Galaxie. Fitting to a '67 should be a straight fit.
Offline
Thanks for the info. That's my plan as well, just swap all the brake components including the booster, master cylinder, spindles, rotors and calipers. That way it won't cost an arm & a leg and it'll be all Ford parts.
I assume it was a '71 Galaxie you pilfered the parts from?
Thread StarterOffline
Yes, a '71 Galaxie. You can use anything from '70 to '72. Galaxies after that used a larger bolt pattern.
I believe the '69 and earlier used smaller bearings. '
Offline
That's great news, thanks! Now to find a local '70 to '72 Galaxie that's being parted out. 
Thread Starter
1 of 1