| This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars |
Offline
Want to buy a few seat trim buttons for a 1963 Galaxie 500XL. One or more. Need eight in total. Pictures of the item(s) needed are in my previous post. Can't seem to get more pictures to load at his time. Thanks for your interest. David.
Offline
Eklers....try here...
Offline
you install these with an elastic ribbon material run thru the paper clip looking piece behind the button then run the toggle on the other end of the ribbon thru a small metal bar with holes. see my pics.
Offline
Here's what the elastic ribbon with toggle looks like
Offline
g-man...... Thanks for your help, and the pics. I'll have to see if I can get any of the toggles. David.
Thread StarterOffline
When I re apholstered my 63 bucket seats I used elastic material (like underwear waist band) to tie to the back of the emblem then pull through the bar on that is hog ringed to the springs on the seat back. Careful ...don't put too much pressure on these aftermarket emblems as the bend pretty easy.
1 of 1