| This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars |
This forum is hosted for free by Boardhost. Create your own free forum!
Offline
Anyone know the correct tubing size for the C-6 transmission oil cooler lines? Going to have to fab up some for mine. Previous owner just stuck bolts in the cooler line connections on the Tranny so it has no cooling.
Offline
might sound stupid, but won't the tube size be dictated by the fitting?
Offline
Most cooling lines are either 5/16" or 3/8 depending on the fitting size.
Offline
Sanddoc wrote:
might sound stupid, but won't the tube size be dictated by the fitting?
Makes sense. Thanks!!
Thread StarterOffline
Most cooling lines are either 5/16" or 3/8 depending on the fitting size.
Thanks! I wasn't sure and wanted to have some of the correct size tubing on hand when I crawl under there to start to fab up a set of lines.
Thread StarterOffline
Maybe a little late to reply, but if not sure on tranny line size, why not slide a tube flaring tool on your existing tubing. All of the holes on the tool have the hole size stamped on them. That way you will know for sure what size it is.
Offline
Maybe a little late to reply, but if not sure on tranny line size, why not slide a tube flaring tool on your existing tubing. All of the holes on the tool have the hole size stamped on them. That way you will know for sure what size it is.
Good idea, but I don't have any lines. The previous owner put bolts in the line fitting holes.
I'm a big guy so I want to have all my parts ready so I don't have to crawl under there any more than needed hehehe..
Thanks
Thread Starter
1 of 1