Galaxie Forum Full-size Ford, Lincoln, and Mercury DazeCars www.galaxieforum.com


This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars

You are not logged in. Would you like to login or register?



February 9, 2015 7:26 pm  #1


1968 Galaxie 500 rear axle??

Hello new member. I tried the search feature got no hits. My queastion is. I have a "none" 9 inch in my 68. It has a rear mounted cover. What rear axle is this? I also have a hammered parts car with a 9 inch. The 9 inch seems like the better opption. But has the smaller brake shoes. And the first axle has mostly new parts. So second queastion. Will the c-clip stlye axle backing plates and brakes work on the 9 inch. Thanks.

 

February 10, 2015 10:02 am  #2


Re: 1968 Galaxie 500 rear axle??

I expect you have the "WER" rear, like I have on my car. It is likely open diff with 2.75 gears, which was pretty common for that set up. Here is a link to info on Ford rear ends. http://www.fordification.com/tech/rearends_ford01.htm

Look on some of the aftermarket brake sites, Wilwood, Stainless Steel Brakes, etc., for info on the various bolt patterns of the 9" rear end end plates, there are three, big bearing, small bearing and Torino. Google images may get you there, too. The WER may, or may not, be similar to one of those, so you'll have to do some measuring to see. The 9" isn't necessarily a better axel, or choice for your car. If you want to change gear ratios and/or add a locking differential, then there will be more parts available for the 9" over the 8 3/4" non-removable center type axel.

 

February 10, 2015 5:29 pm  #3


Re: 1968 Galaxie 500 rear axle??

Thank you very much. I will keep the 9 inch for a spare right now.

     Thread Starter
 

February 10, 2015 5:36 pm  #4


Re: 1968 Galaxie 500 rear axle??

Using that link I have a WER - A. Once again thanks.

     Thread Starter
 

February 11, 2015 8:35 am  #5


Re: 1968 Galaxie 500 rear axle??

This may also be of use?

 

February 11, 2015 10:57 am  #6


Re: 1968 Galaxie 500 rear axle??

H.B. Halicki wrote:

Using that link I have a WER - A. Once again thanks.

Check the tag on the axel to confirm.

 

February 11, 2015 3:45 pm  #7


Re: 1968 Galaxie 500 rear axle??

Try this link as well:

www.kevinstang.com/Ninecase.htm

 

February 11, 2015 10:14 pm  #8


Re: 1968 Galaxie 500 rear axle??

I did find the tag. That is how I found the WER-A . Thanks for the help. Now if I could get a good engine. I am up to 3 302's and one sludged up 351W. Fingers crossed on this recent. 68 302 I just found.
 

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum