Galaxie Forum Full-size Ford, Lincoln, and Mercury DazeCars www.galaxieforum.com


This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars

You are not logged in. Would you like to login or register?



August 14, 2019 5:05 am  #41


Re: cruise o matic to C6 conversion info...

C4 (introduced 1964) was  not installed with FE engines.

FE's could have, depending on the year,  FX & MX Cruise-O-Matic, C6.


Bill / Retired Ford Parts Manager / 1928/89 Ford Passenger Car & 1928/2001 Ford Truck ~ Part Number Research & VIN Decoding
 

August 15, 2019 5:51 am  #42


Re: cruise o matic to C6 conversion info...

The shift linkage from the column to the C6 is back in it's stock Galaxie configuration except a short rod was added at the transmission end to make it reach. The short section is  welded to the Galaxie linkage and at the other end has a 90 degree bend with about an inch to go thru the hole in the shift arm on the C6.

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum