| This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars |
Offline
I'm running a oil cooler up front for my tranny. (previous owner decided the C6 didnt' need one for some reason). There are no oil lines to the cooler. I'm going to run rubber lines since they are easier to route. All I can find locally is fuel line grade. Will that hold up to the transmision fluid or will the Type F oil break it down? Thanks..
Offline
I have high pressure fuel line running from my rack return line and my hydroboost return line. The ruber will get stiff over time but should hold up. A better option might be to use steel lines for most of it and then use a rubber connector line in the places where the bends are tight. The more line you can do in steel the less places you have to develope a leak.
1 of 1